Glass Pool Fences Polished Hardware

⊕ Frameless Glass Pool FENCES
⊕ Polish Finish Hardware 
⊕ 1200mm STD height panels
⊕ INSTALLATION GUIDES AND TIPS

Design &

Measure

To help you plan what you need for your DIY Frameless Glass Pool Fence we have prepared all the required design steps and details below: 

We have 2 types of hinges you can choose from, either from our Standard range or Deluxe Soft-Close range. Your Hinges will dictate which glass panels you need to purchase.

Standard Hinges

⊕ Self-Closing Hinges
⊕ Made from Stainless Steel 316
⊕ Have a “Anti-Toe Hold” cone cap
⊕ Part of the “Master Hinge” brand
⊕ Weighted capacity of 25kgs per pair
⊕ Able to suit wide range of applications:
— Glass Hinge Panel to Glass Gate Panel
— Square Post to Glass Gate Panel
— Wall to Glass Gate Panel

.

Soft-Close Hinges
Our Soft-Close hinge range are the safest and most reliable specially designed pool fence hinge in the industry that complies with stringent Australian Standards AS1926 and AS2820

⊕ 155 Series are compatible with our STD Glass Panels
⊕ 125 Series are compatible with our Soft-Close Glass Panels
⊕ Eliminates Slamming Glass Gates
⊕ Self-Closing pool fence compliant safety hinge
⊕ Adjustable closing speeds with European dampeners for a Soft-Close action
155 Series come with a Polymer cone cap supplied for “Anti-Toe Hold”
⊕ Made from Stainless Steel 2205 (Higher rust & wear resistant than SS316)
⊕ Weighted capacity of 45kgs per pair
⊕ Able to suit wide range of applications:
— Glass Hinge Panel to Glass Gate Panel
— Square Post to Glass Gate Panel
— Wall to Glass Gate Panel

Hinge Gap (A)
⊕ STD Range = 10mm
⊕ Soft Close Range = 5mm

Latch Gap (B) Glass to Glass
⊕ 9mm

Latch Gap (C) Glass to Square Post/Wall
⊕ STD Range = 22mm
⊕ Soft Close Range = 8mm

STD Gap (D)
⊕ 38mm – 60mm

To be compliant to pool fencing requirements, Raked Panels (also known as Retaining Wall Panels) may be needed.

Our raked panels are higher at one side of the glass which enables step points or changes in height to be overcome. We have 1200mm Wide panels with 5 heights available.

The modular raked panels are a large cost savings versus custom made raked glass and also enable jobs to be completed immediately.

⊕ Our raked panels come standard with 1200mm height one end & 1200mm Width
⊕ The adjusted height options are: 1400, 1500, 1600, 1700, 1800mm
⊕ Each panel comes with a 400mm straight top on the high end
⊕ Grade ‘A’ 12mm thick clear toughened glass
⊕ 5mm radius corners
⊕ Compliant to AS/NZS2208
⊕ Examples of raked panel uses:

A) Overcome different levels along fence line

B) Overcome landscaping as a toe hold along fence line

C) Overcome stepping point issues around fence line

*Please take care to refer to relevant standards to ensure our raked panels are suitable for your needs as each installation situation / compliance requirement is unique.

Facemount Spigots

⊕ Friction facemount spigots
⊕ Slimline 45mm front profile
⊕ Duplex Stainless Steel 2205
⊕ Hidden Facemount Installation
⊕ 2x M12 fixing nuts included (Rod / Screws sold seperately)
⊕ Slotted fixing hole allows for easy fixing & adjustment
⊕ Earthing terminal included
⊕ Comes in 3 colours: Black, Satin, Polish

Base Plate Spigots

Double Friction Design: This patented design allows for faster installation and easier alignment of glass panels.
⊕ Duplex stainless steel 2205
⊕ Double friction design
⊕ Slimline 45mm front profile
⊕ Multiple base plate fixing points
⊕ Includes 22mm high domical cover

Tilt Spigots

Innovative face mount spigot featuring tilt adjustment for easy alignment of glass panels
⊕ Easy tilt adjustment
⊕ Duplex stainless steel 2205
⊕ Face-mount spigot, fix to vertical surface of concrete, timber/steel beams
⊕ 2 Part spigot for easy install:
(1) Rear Plate fixes to vertical surface
(2) Spigot attaches to rear plate with 2x M8 counter sunk screws
⊕ Timber/beam fixing – 2x fixing points in the rear plate for increased strength
⊕ Concrete fixing – 1x Sturdy M18 fixing point – Ideal for narrow slabs
⊕ Earthing terminal included

Top Mount Spigots (Low Profile)

Single central hidden fixing idea for narrow beams or slab installations
⊕ Duplex stainless steel 2205 spigot
⊕ Requires 1x Central M12 fixing and specially machined nut
⊕ Ideal for narrow/PFC beams and slab installations
⊕ No large core holes or domical covers required
⊕ 45mm front slimline profile x 65mm depth
⊕ Suits 12mm & 17.52mm Glass Panels
⊕ Friction fit glass installation with friction packer
⊕ 120mm Depth spigot mouth provides extra clamping strength and rigidity 

A contemporary clamp which acts as a brace between glass panels, providing extra rigidity to your fence.

All our clamps are made from Stainless Steel 316 and come in Polish, Satin or Matt Black finish.
Clamps are “Friction Fit” meaning that the glass panels do not require pre-drilled holes for fitting. 

Straight Clamps:

⊕ Suits 12mm Glass Panels
⊕ SML = Ideal for panels with gaps between 20-50mm
⊕ LGE = Ideal for panels with gaps between 20-95mm

90 Degree Clamps:

⊕ Suits 12mm Glass Panels
⊕ Bracing of glass panels at 90 degrees

Wall Clamp:

⊕ Suits 12mm Glass Panels
⊕ Brace glass to wall/posts
⊕ 2x Countersunk fixing holes to wall/post

Offset Wall Clamp:

⊕ Suits 12mm Glass Panels
⊕ Brace glass to walls/posts
⊕ Rotate for left or right side fixing
⊕ 1x Countersunk hole for fixing to wall/post

Swivel Clamp:

⊕ Suits 12mm Glass Panels
⊕ Multi angle clamp – a great solution for variable angle installs

Square Face/ Square Back Clamp:

⊕ Duplex Stainless Steel 2205
⊕ Suits 8mm, 10mm, 12mm Glass Panels
⊕ Supports glass panels with SQ Post / Wall

Because we have a range of different spigots and there are a range of different applications and locations you’ll be installing your ‘Frameless Glass Pool Fence’ there are a few different options you can choose from to install your spigots securely.

Cement Slabs / Tiles on concrete slab:
Base Plate Spigot = 4x M10 x 120mm – SS316 Threaded Rods (Chem Anchor)
Face-mount Spigot = 2x M12 x 120mm – SS316 fixing Threaded Rod (Chem Anchor)
Deluxe Top-mount Spigot = 1x M12 x 120mm – SS316 Threaded Rod (Chem Anchor)
Tilt Spigot = 1x M18 x 120mm – SS316 Threaded Rod (Chem Anchor)

Timber Installations (Part way through Beam/Joist):
Base Plate Spigot = 4x M10 x 110mm – SS316 Timber Lag Screws (Must have sufficient anchoring)
Face-mount Spigot = 2x M12 x (115mm or 160mm) – SS316 Lag Screws
Deluxe Top-mount Spigot = 1x M12 x (115mm or 160mm) – SS316 Lag Screws
Tilt Spigot = 2x M12 x 93mm – SS316 Lag Screw Kit

Timber Installations (All the way through Beam/Joist):
⊕ Base Plate Spigot = 4x M10 SS316 Threaded Rod (Cut to size onsite) (Must have sufficient anchoring)
⊕ Face-mount Spigot = 2x M12 SS316 Threaded Rod (Cut to size onsite)
⊕ Deluxe Top-mount Spigot = 1x M12 SS316 Threaded Rod (Cut to size onsite)
⊕ Tilt Spigot = 2x M12 SS316 Threaded Rod (Cut to size onsite)

Online

Planner

How To Use It:
  1. Enter all your dimensions
  2. Configure gates & gaps
  3. SAVE COMPONENTS LIST 
  4. Add all required products to cart

What It Helps With:
  • Calculate all materials required
  • Create layout plan with all details for installation
  • Provide a detailed parts list

6 STEP

Process

1. Glass Panels & Gates

Choose between our Standard Range (STD) or Soft Close Range (SC).
The range determines which Hinge Panel, Hinges and Gate Panel you need. 

For planning your pool fencing project and to calculate how many panels are required, you need to know the gap dimensions between panels, hinges, doors and walls. We recommend you use our online fence planner. 

Hinge Gap (A)
⊕ STD Range = 10mm
⊕ Soft Close Range = 5mm

Latch Gap (B) Glass to Glass
⊕ 9mm

Latch Gap (C) Glass to Square Post/Wall
⊕ STD Range = 22mm
⊕ Soft Close Range = 8mm

STD Gap (D)
⊕ 38mm – 60mm

  • Sale! Glass Fences Sydney

    POOL PANEL – No Holes

    $15.32$153.11
    Select options
  • Sale!

    RETAINING WALL PANEL – Frameless

    $166.46$214.02
    Select options
  • Sale!

    SOFT CLOSE – Hinge Panel

    $65.70$167.92
    Select options
  • Sale!

    SOFT CLOSE – Pool Gate to Hinge Panel – 12mm

    $101.27$115.90
    Select options
  • Sale!

    SOFT CLOSE – Pool Gate to Wall/Post – 12mm

    $101.27$115.90
    Select options
  • Sale!

    STD Hinge Panel

    $58.72$163.19
    Select options
  • Sale!

    STD Pool Gate to Hinge Panel – 8mm

    $71.00$89.00
    Select options

2. Hinges

We have 2 types of hinges you can choose from, either from our Standard range or Deluxe Soft-Close range. Your Hinges will dictate which glass panels you need to purchase.

Standard Hinges

⊕ Self-Closing Hinges
⊕ Made from Stainless Steel 316
⊕ Have a “Anti-Toe Hold” cone cap
⊕ Part of the “Master Hinge” brand
⊕ Weighted capacity of 25kgs per pair
⊕ Able to suit wide range of applications:
— Glass Hinge Panel to Glass Gate Panel
— Square Post to Glass Gate Panel
— Wall to Glass Gate Panel

.

Soft-Close Hinges
Our Soft-Close hinge range are the safest and most reliable specially designed pool fence hinge in the industry that complies with stringent Australian Standards AS1926 and AS2820

⊕ 155 Series are compatible with our STD Glass Panels
⊕ 125 Series are compatible with our Soft-Close Glass Panels
⊕ Eliminates Slamming Glass Gates
⊕ Self-Closing pool fence compliant safety hinge
⊕ Adjustable closing speeds with European dampeners for a Soft-Close action
155 Series come with a Polymer cone cap supplied for “Anti-Toe Hold”
⊕ Made from Stainless Steel 2205 (Higher rust & wear resistant than SS316)
⊕ Weighted capacity of 45kgs per pair
⊕ Able to suit wide range of applications:
— Glass Hinge Panel to Glass Gate Panel
— Square Post to Glass Gate Panel
— Wall to Glass Gate Panel


Hinge Gap (A)
⊕ STD Range = 10mm
⊕ Soft Close Range = 5mm

Latch Gap (B) Glass to Glass
⊕ 9mm

Latch Gap (C) Glass to Square Post/Wall
⊕ STD Range = 22mm
⊕ Soft Close Range = 8mm

STD Gap (D)
⊕ 38mm – 60mm

  • Sale!

    STD Hinge – SQ Post / Wall to Pool Gate – Polish

    Original price was: $189.00.Current price is: $141.20.
    - +
    Add to cart
  • Sale!

    STD Hinge – Hinge Panel to Pool Gate

    Original price was: $180.00.Current price is: $140.00.
    - +
    Add to cart
  • Sale!

    SOFT CLOSE 155 – Wall to Pool Gate – Compatible w. STD

    Original price was: $500.00.Current price is: $449.00.
    - +
    Add to cart
  • Sale!

    SOFT CLOSE 155 – Glass to Pool Gate – Compatible w. STD

    Original price was: $550.00.Current price is: $449.00.
    - +
    Add to cart
  • Sale!

    SOFT CLOSE 155 – 50mm Round Post to Pool Gate – Compatible w. STD

    Original price was: $500.00.Current price is: $449.00.
    - +
    Add to cart
  • Sale!

    SOFT CLOSE 125 – Wall to Pool Gate

    Original price was: $500.00.Current price is: $350.00.
    - +
    Add to cart
  • Sale!

    SOFT CLOSE 125 – Hinge Panel to Pool Gate

    Original price was: $500.00.Current price is: $350.00.
    - +
    Add to cart

3. Latches

⊕ Standard Latch Kits are NOT lockable. 
NOTE: You can purchase the “UPGRADE Lock Kit” if lock option is required

  • Sale!

    MASTER – Glass to Round Post STAINLESS LATCH KIT

    Original price was: $190.00.Current price is: $149.90.
    - +
    Add to cart
  • Sale!

    Latch Kit – Pool Gate to Wall / Square Post – STAINLESS STEEL

    Original price was: $139.00.Current price is: $129.90.
    - +
    Add to cart
  • Sale!

    Latch Kit – Pool Gate to Wall / Square Post

    Original price was: $119.90.Current price is: $89.90.
    - +
    Add to cart
  • Sale!

    Latch Kit – Pool Gate to Glass Panel – Stainless Steel

    Original price was: $150.00.Current price is: $129.90.
    - +
    Add to cart
  • Sale!

    Latch Kit – Pool Gate to Glass Panel – 90º Internal

    Original price was: $159.90.Current price is: $119.90.
    - +
    Add to cart
  • Sale!

    Latch Kit – Pool Gate to Glass Panel – 90º External

    Original price was: $159.90.Current price is: $119.90.
    - +
    Add to cart
  • Sale!

    Latch Kit – Pool Gate to Glass Panel

    Original price was: $129.90.Current price is: $99.90.
    - +
    Add to cart

4. Spigots

There are 3 types of Spigots to choose from

⊕ Face Mount Spigots – Ideal for attaching on front of terrace / balcony
⊕ Spigot with Base Plate – Best DIY option. Easy to install
⊕ Top Fix Spigot – Slightly more advanced to install. For Minimalistic look or small space
⊕ 2 spigots per Hinge or Pool glass panel

Facemount Spigots

⊕ Friction facemount spigots
⊕ Slimline 45mm front profile
⊕ Duplex Stainless Steel 2205
⊕ Hidden Facemount Installation
⊕ 2x M12 fixing nuts included (Rod / Screws sold seperately)
⊕ Slotted fixing hole allows for easy fixing & adjustment
⊕ Earthing terminal included
⊕ Comes in 3 colours: Black, Satin, Polish

Base Plate Spigots

Double Friction Design: This patented design allows for faster installation and easier alignment of glass panels.
⊕ Duplex stainless steel 2205
⊕ Double friction design
⊕ Slimline 45mm front profile
⊕ Multiple base plate fixing points
⊕ Includes 22mm high domical cover

Tilt Spigots

Innovative face mount spigot featuring tilt adjustment for easy alignment of glass panels
⊕ Easy tilt adjustment
⊕ Duplex stainless steel 2205
⊕ Face-mount spigot, fix to vertical surface of concrete, timber/steel beams
⊕ 2 Part spigot for easy install:
(1) Rear Plate fixes to vertical surface
(2) Spigot attaches to rear plate with 2x M8 counter sunk screws
⊕ Timber/beam fixing – 2x fixing points in the rear plate for increased strength
⊕ Concrete fixing – 1x Sturdy M18 fixing point – Ideal for narrow slabs
⊕ Earthing terminal included

Top Mount Spigots (Low Profile)

Single central hidden fixing idea for narrow beams or slab installations
⊕ Duplex stainless steel 2205 spigot
⊕ Requires 1x Central M12 fixing and specially machined nut
⊕ Ideal for narrow/PFC beams and slab installations
⊕ No large core holes or domical covers required
⊕ 45mm front slimline profile x 65mm depth
⊕ Suits 12mm & 17.52mm Glass Panels
⊕ Friction fit glass installation with friction packer
⊕ 120mm Depth spigot mouth provides extra clamping strength and rigidity 

Because we have a range of different spigots and there are a range of different applications and locations you’ll be installing your ‘Frameless Glass Pool Fence’ there are a few different options you can choose from to install your spigots securely.

Cement Slabs / Tiles on concrete slab:
Base Plate Spigot = 4x M10 x 120mm – SS316 Threaded Rods (Chem Anchor)
Face-mount Spigot = 2x M12 x 120mm – SS316 fixing Threaded Rod (Chem Anchor)
Deluxe Top-mount Spigot = 1x M12 x 120mm – SS316 Threaded Rod (Chem Anchor)
Tilt Spigot = 1x M18 x 120mm – SS316 Threaded Rod (Chem Anchor)

Timber Installations (Part way through Beam/Joist):
Base Plate Spigot = 4x M10 x 110mm – SS316 Timber Lag Screws (Must have sufficient anchoring)
Face-mount Spigot = 2x M12 x (115mm or 160mm) – SS316 Lag Screws
Deluxe Top-mount Spigot = 1x M12 x (115mm or 160mm) – SS316 Lag Screws
Tilt Spigot = 2x M12 x 93mm – SS316 Lag Screw Kit

Timber Installations (All the way through Beam/Joist):
⊕ Base Plate Spigot = 4x M10 SS316 Threaded Rod (Cut to size onsite) (Must have sufficient anchoring)
⊕ Face-mount Spigot = 2x M12 SS316 Threaded Rod (Cut to size onsite)
⊕ Deluxe Top-mount Spigot = 1x M12 SS316 Threaded Rod (Cut to size onsite)
⊕ Tilt Spigot = 2x M12 SS316 Threaded Rod (Cut to size onsite)

  • Sale!

    Base Plated Spigot NON CONDUCTIVE – SILVER

    Original price was: $99.90.Current price is: $85.90.
    - +
    Add to cart
  • Sale!

    MADRID – Base Plated Spigot – POLISHED

    Original price was: $69.90.Current price is: $56.90.
    - +
    Add to cart
  • Sale!

    MADRID – Core Drill Spigot – POLISHED

    Original price was: $69.90.Current price is: $56.90.
    - +
    Add to cart
  • Sale!

    MADRID – High Domical Cover – POLISHED

    Original price was: $8.50.Current price is: $6.90.
    - +
    Add to cart
  • Sale!

    BASE PLATE Spigot – Square – Adjustable

    Original price was: $87.00.Current price is: $65.90.
    - +
    Add to cart
  • Sale!

    FACEMOUNT Spigot – Above level

    Original price was: $150.00.Current price is: $99.00.
    - +
    Add to cart
  • Sale!

    FACEMOUNT Spigot – Square – Tiltable

    Original price was: $132.00.Current price is: $98.50.
    - +
    Add to cart
  • Sale!

    TOP FIX Spigot – Square

    Original price was: $109.00.Current price is: $81.60.
    - +
    Add to cart

5. Clamps

Clamps are needed to provide additional stability for frameless glass pool fences. Especially hinge panels have to be braced to the next pool panel with an additional clamp.

⊕ 1 clamp per gap

A contemporary clamp which acts as a brace between glass panels, providing extra rigidity to your fence.

All our clamps are made from Stainless Steel 316 and come in Polish, Satin or Matt Black finish.
Clamps are “Friction Fit” meaning that the glass panels do not require pre-drilled holes for fitting. 

Straight Clamps:

⊕ Suits 12mm Glass Panels
⊕ SML = Ideal for panels with gaps between 20-50mm
⊕ LGE = Ideal for panels with gaps between 20-95mm

90 Degree Clamps:

⊕ Suits 12mm Glass Panels
⊕ Bracing of glass panels at 90 degrees

Wall Clamp:

⊕ Suits 12mm Glass Panels
⊕ Brace glass to wall/posts
⊕ 2x Countersunk fixing holes to wall/post

Offset Wall Clamp:

⊕ Suits 12mm Glass Panels
⊕ Brace glass to walls/posts
⊕ Rotate for left or right side fixing
⊕ 1x Countersunk hole for fixing to wall/post

Swivel Clamp:

⊕ Suits 12mm Glass Panels
⊕ Multi angle clamp – a great solution for variable angle installs

Square Face/ Square Back Clamp:

⊕ Duplex Stainless Steel 2205
⊕ Suits 8mm, 10mm, 12mm Glass Panels
⊕ Supports glass panels with SQ Post / Wall

  • Sale!

    WALL TO PANEL Clamp – SS316

    Original price was: $33.00.Current price is: $27.30.
    - +
    Add to cart
  • Sale!

    SWIVEL Clamp (90º – 180º) – SS316

    Original price was: $50.00.Current price is: $41.10.
    - +
    Add to cart
  • Sale!

    SMALL GAP Clamp ( 20 – 95mm) – SS316

    Original price was: $23.00.Current price is: $18.90.
    - +
    Add to cart
  • Sale!

    SLIMLINE CLAMP SS2205 – SQUARE front, ROUND back

    Original price was: $19.00.Current price is: $15.40.
    - +
    Add to cart
  • Sale!

    SLIMLINE CLAMP SS2205 – SQUARE front, FLAT back

    Original price was: $19.00.Current price is: $15.40.
    - +
    Add to cart
  • Sale!

    LARGE GAP Clamp ( 20 – 95mm) – SS316

    Original price was: $25.00.Current price is: $20.50.
    - +
    Add to cart
  • Sale!

    GLASS TO WALL OFFSET Clamp – SS316

    Original price was: $29.00.Current price is: $24.10.
    - +
    Add to cart
  • Sale!

    CLAMP SS2205 – “D” front, ROUND back

    Original price was: $22.00.Current price is: $17.60.
    - +
    Add to cart
  • Sale!

    CLAMP SS2205 – “D” front, FLAT back

    Original price was: $22.00.Current price is: $17.60.
    - +
    Add to cart
  • Sale!

    90 DEGREES Clamp – SS316

    Original price was: $27.00.Current price is: $22.10.
    - +
    Add to cart
  • Sale!

    90 DEGREES Clamp – Round Back – SS2205

    Original price was: $24.00.Current price is: $19.30.
    - +
    Add to cart
  • Sale!

    90 DEGREES Clamp – Flat Back – SS2205

    Original price was: $29.00.Current price is: $24.10.
    - +
    Add to cart

6. Fasteners & Accessories

⊕ HIGHLY Recommended ordering 2 more packs of fixings and screws as spare
 Read the description of your chosen spigot to determine which screws to use
⊕ Use Chem Anchor Glue to fix rods in concrete 

Because we have a range of different spigots and there are a range of different applications and locations you’ll be installing your ‘Frameless Glass Pool Fence’ there are a few different options you can choose from to install your spigots securely.

Cement Slabs / Tiles on concrete slab:
Base Plate Spigot = 4x M10 x 120mm – SS316 Threaded Rods (Chem Anchor)
Face-mount Spigot = 2x M12 x 120mm – SS316 fixing Threaded Rod (Chem Anchor)
Deluxe Top-mount Spigot = 1x M12 x 120mm – SS316 Threaded Rod (Chem Anchor)
Tilt Spigot = 1x M18 x 120mm – SS316 Threaded Rod (Chem Anchor)

Timber Installations (Part way through Beam/Joist):
Base Plate Spigot = 4x M10 x 110mm – SS316 Timber Lag Screws (Must have sufficient anchoring)
Face-mount Spigot = 2x M12 x (115mm or 160mm) – SS316 Lag Screws
Deluxe Top-mount Spigot = 1x M12 x (115mm or 160mm) – SS316 Lag Screws
Tilt Spigot = 2x M12 x 93mm – SS316 Lag Screw Kit

Timber Installations (All the way through Beam/Joist):
⊕ Base Plate Spigot = 4x M10 SS316 Threaded Rod (Cut to size onsite) (Must have sufficient anchoring)
⊕ Face-mount Spigot = 2x M12 SS316 Threaded Rod (Cut to size onsite)
⊕ Deluxe Top-mount Spigot = 1x M12 SS316 Threaded Rod (Cut to size onsite)
⊕ Tilt Spigot = 2x M12 SS316 Threaded Rod (Cut to size onsite)

  • Sale!

    Heavy Duty Cartridge Gun (Suits 280ml Tubes)

    Original price was: $48.50.Current price is: $35.88.
    - +
    Add to cart
  • Sale!

    Chem Anchor Glue 280ml Tube

    Original price was: $37.50.Current price is: $22.64.
    - +
    Add to cart
  • Sale!

    4x M10 x 120mm – Threaded Rod (Chemical Anchor Bolts)

    Original price was: $12.90.Current price is: $8.46.
    - +
    Add to cart
  • Sale!

    4x M10 x 120mm – Stainless Steel Dynabolts

    Original price was: $10.99.Current price is: $9.04.
    - +
    Add to cart
  • Sale!

    4x M10 x 110mm – Lag Screws (Timber)

    Original price was: $13.00.Current price is: $7.00.
    - +
    Add to cart
  • Sale!

    2x M12 x 93mm Lag Screws (Timber)

    Original price was: $15.00.Current price is: $9.00.
    - +
    Add to cart
  • Sale!

    2x M12 x 120mm – Threaded Rods (Chemical Anchor Bolts)

    Original price was: $15.00.Current price is: $9.00.
    - +
    Add to cart
  • Sale!

    1x M18 x 120mm – Threaded Rod (Chemical Anchor Bolt)

    Original price was: $7.00.Current price is: $5.00.
    - +
    Add to cart
  • Sale!

    1x M12 x 160 – Lag Screw (Timber)

    Original price was: $7.00.Current price is: $5.00.
    - +
    Add to cart
  • Sale!

    1x M12 x 120mm – Threaded Rod

    Original price was: $7.00.Current price is: $5.00.
    - +
    Add to cart
  • Sale!

    1x M12 x 115mm – Lag Screws (Timber)

    Original price was: $7.00.Current price is: $5.00.
    - +
    Add to cart
  • Sale!

    1x M12 x 1000mm – Threaded Rod (Custom Cut)

    Original price was: $20.00.Current price is: $15.00.
    - +
    Add to cart

Trade Tips

& Questions

Online Ordering

It is easy to SITE MEASURE, PLAN, ORDER & INSTALL your DIY Fence.
Simply follow our step by step Site Measure Guide below to work out everything you need.

Have Questions?
Feel free to reach out via Messenger, Email or call our fencing experts directly.

Trade Pricing & Discounts

Our goal is to provide trade & wholesale pricing to all our customers, and we beat most retail prices by an average of 20-50%.

We also offer a match price guarantee on retailers such as Bunnings, Mitre10, Stratco etc.

When you shop with FencesSydney.com, you know you get the best deal on your DIY projects.

Free Site Delivery

Delivered directly to to your site within Sydney Metro Area.

Standard delivery fee of $89 will be added at checkout.

Regional Orders will be custom quoted. We will try to minimise costs by batching orders for customers in the same directions.

Pick up available for free from one of our warehouse locations, depending on products and availability.

Spigot Layout & Setup
  • String Line
  • Tape Measure
  • Level
  • Removable Marker (Pencil / Chalk)
Panel Install
  • 12mm & 14mm Concrete drill bit
  • Impact Driver
  • Sockets to suite fixings
  • Extension bar for socket (Used with Deluxe Top Mount Spigots)
  • Allen Key Set
Gate Installation
  • 2x Quick Clamps
  • Timber / Bottom Spacing Packers (Sit your gate on top to set the bottom spacing gap)
  • Timber or Plastic Packers to set glass panel heights

Here is what you need to do

  1. First you need to Measure the Overall width of your fence project.
  2. Draw everything down on paper, write down the measurements and mark where you are planning to have your gates and connections to walls or posts etc.
  3. Plan your frame-less Gate Assembly & Dimensions, decide whether you want to use our:
    • Standard Range (STD) or
    • Soft Close Range, based on your preferences and budget.
  4. Once you know, calculate the width of your pool gate assembly
    • Write down the gap dimensions for your hinges and latch set.
    • Determine the total width of your Gate Assembly
  5. Next is to determine how many pool panels you will need for your frameless-less glass pool project.
  6. Calculate how many spigots, clamps and accessories you need. As a rule of thumb, you need:
    • 2x Spigots for each Pool Panel or Hinge Panel
    • 1x Clamp for each gap (Optional)
    • 1x Hinge set and one latch per pool gate
    • Enough Timber Screws or Concrete fixings for each spigot
    • 1x Chem Anchor Glue tube = approx. 15-20 cement in holes

Installing pool panels are easy and suits level locations where the panels can be installed horizontally. 

Follow our step by step guide on how to install your glass pool fence. 

Glass pool fences are an easy project that can be done by one person with reasonable skills, but a second person is highly recommended.

If you do have questions or concerns, please let us know. 

Spigots are chosen based on location, preference and colour. 

We do recommend using base plate spigots for DIY installations, as they are easiest to install, although in situations where this is NOT possible e.g. Raised Decking where spigots need to go into a timber joist / beam then we would recommend using the Deluxe Top Mount Spigot.

Please double check your installation methods for each spigot before ordering 

NO#1 TIP: “Check twice, order & install once”

The installation of our gates are easy. 

We recommend you have enough wood packers to set the gate height. 

When fitting the latches onto the hinge panel / wall / square post and gate, use clamps or a second person to hold the gate in the required position. 

Make sure you have the correct spacing for your hinge and latch type,  and all gaps are parallel 

Depending on your budget and application, for the hinges you will select between our Standard or Soft-Close range. 

For the latch this would just depend on the location of your gate (Straight to Glass/Wall/Post/Corner to Glass) etc… 

If you are looking to lock your gates you will need to purchase the required latch & our “Lockable Latch Upgrade Kit” to convert our standard latches to lockable.

Our pool fencing glass is made from toughened, clear highly durable glass. Additional accessories are according to their description. Accessories (Hinges/Clamps/Latches) either come in Duplex Stainless Steel 2205 or a special blend of polymer and Duplex Stainless Steel 2205 Fixing Kits are come as standard Stainless Steel 316

Collection of Orders from our depot is available. Please allow 24hrs to process your order, pick and pack your products ready for collection. We send you an email with all details once it is ready. 

For urgent orders please call us to see how we can help you. However, we cannot guarantee it will be possible every time but will do our best to facilitate urgent orders. Thank you for your understanding. 

Orders are typically processed and delivered within 3 – 5 business days*


Order Confirmations:
 We provide order confirmations via text as soon as your order is packed and ready for delivery.

*stock permitting, for large orders time-frame may change and if so, we will contact you.

Our goal is to provide trade & wholesale pricing to all our customers, and we beat most retail prices by an average of 20-50%.

We also offer a match price guarantee on retailers such as Bunnings, Mitre10, Stratco etc.

When you shop with FencesSydney.com, you know you get the best deal on your DIY projects.

Returns

We are happy to offer a credit or exchange for change of mind on our ranges. The following time-frames apply: 

  • 3 months from date of delivery on our dedicated trucks or delivery by the transport company

Subject to the Consumer Guarantees outlined below, we accept stock returns at, our discretion. If discretion applied, stock returned within the above time-frames can be returned for an exchange or credit subject to the following conditions:

  • Proof of purchase must be accompanied with the returned merchandise.
  • The merchandise must be resellable and in its original condition with all packaging intact.
  • Any discounts received at the time of purchase will be carried over.
  • A restocking fee of 10% or $29 (whichever is greater) applies to returned items.
  • Cash or equivalent refunds are not provided.
 

Our return policy does not apply to cut to size or custom orders such as: project glass/hardware/extrusion, Enduroshield coating, cut to size screening, cut to size battens, cut to size wire, CNC and turret etc.

1.1.  The Supplier warrants that the Customer’s rights and remedies arising from a warranty against defects are in addition to other rights and remedies under any applicable law in relation to the goods and services to which the warranty relates.

1.2.  The Supplier does not purport to restrict, modify or exclude any liability that cannot be excluded under the Competition and Consumer Act 2010 (Cth) or any related or complementary legislation or regulations as in force and amended from time to time.
Warranty for Goods 

1.3. The Customer must report any defect in any Goods supplied within fourteen (14) days from the date that the defect became apparent (time being of the essence).

1.4. The Supplier warrants:
 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the Goods repaired or replaced if the Goods are not of acceptable quality and the failure does not amount to a major failure.

1.5. The Customer acknowledges that additional costs incurred, such as labour and/or freight, will be borne by the Customer.

1.6. If the Goods and Services are not of a kind ordinarily acquired for personal, domestic or household use or consumption, the Supplier’s liability for a consumer guarantee under the Australian Consumer Law in relation to those Goods and Services is limited to, at the discretion of the Supplier 

1.6.1. The resupply of the Goods and Services;

1.6.2. The payment of the cost of providing the Goods and Services again.
Claims made under Warranty

1.7. Subject to clause 1.2, claims for warranty should be made in one of the following ways:

1.7.1. The Customer must send the claim in writing together with proof of purchase to the Supplier’s business address.

1.7.2. The Customer must email the claim together with the proof of purchase & photos to the Supplier on [email protected];


1.7.3. The Customer must contact the Supplier on the Supplier’s business number 0401938011.

1.8. Goods where a claim is made are to be returned to the Supplier or are to be left in the state and condition in which they were delivered until such time as the Supplier or its Agent has inspected the Goods. Such inspection is to be carried out within a reasonable time after notification.

1.9. The Supplier will not accept claims for damaged or defective Goods or for Goods returned where the Customer has not maintained proper care of the delivered Goods.

1.10. Goods are to be returned to the Suppliers site from where they were purchased.

When you confirm an online order, we will follow up by emailing you a sales order confirmation.

An order can be cancelled without fee/penalty at any time prior to packing the goods, which happens normally within 24 hours. You can cancel your order until 9am the next business day.

If cancelled after your goods have been packed, a restocking fee may apply.